撸奶社区

Fire Safety Tips

• Do not charge a device under a pillow, on the bed or on a couch 鈥� they聽can overheat and cause a fire
• Do not use or charge a battery that shows signs of swelling, overheating聽or damage聽
• Do not charge e-bikes, scooters, power tool batteries, remote control cars and any other lithium ion powered devices while you sleep or whilst you are away from home
• Only charge e-bikes and scooters in designated charging areas.聽Do聽not聽charge them in offices, bedrooms or corridors
• Only use the battery that is designed for the device
• Only use the charging equipment that came with the device, and do not use聽it if it is damaged
• Do not leave batteries or devices in direct sunlight or in hot vehicles
• Store batteries away from anything that can catch fire

Electrical Safety

The main causes of electrical fires are:

• Old equipment
• Incorrectly modified/wired equipment
• Overloaded multi-plug boards
• Faulty equipment - This is why it is important to have all portabl electrical equipment tested and tagged prior to its introduction into the聽 workplace and then at periodical intervals

Note:聽Multi-plug boards must not be connected to other multi-plug boards as the wiring in each is limited in capacity by design i.e. a four point multi-plug board can only provide power to four other devices. Overloading the board can cause the wiring to overheat, leading to fire starting.

Heaters and other high-draw wattage devices must not be plugged into multi-plug boards as they will overload the wiring.

For more information please see: Electrical Safety

Housekeeping

Keeping things nice and tidy assists in preventing fires. If we do not, combustible objects may drop on heaters or hot objects may drop on to combustible items.

Do not use wedges to聽keep doors open

聽Using a wedge to prop open the doors place everyone in the building at risk,聽as this will allow the smoke to spread throughout the building along corridors聽that are necessary for escape

聽For this reason, do not hold back older style smoke-stop doors with wedges聽or door hooks. Staff should remove these wedges as soon as they are spotted.聽聽

Heaters

Again, heaters can be a problem. Fan heaters with thermostatic聽control may appear to be turned off, and fires can start if an item is placed in front of them

In other cases, heaters may be on a separate circuit that energises unexpectedly

Some electrical equipment, and in particular older electronic equipment, have fans which are designed to prevent overheating. Never block or cover the vents on such equipment

Hot work and equipment

聽If you are buying or using items that heat up in normal operations, you need to think about how and where they are being used

In some cases (e.g. when using laser-cutting booths) the risk of a fire is higher, so you need to have appropriate control measures in place. This may include a fire extinguisher. Your risk assessment should identify the appropriate聽control measures

Never set up equipment that is designed to produce heat, sparks or flame (for example if soldering, grinding, burning) in an area where flammable materials might be present. A risk assessment or Hot Work Permit will be required. If in doubt, speak to our Fire Safety聽manager

At the very least, hot items need to be placed in an area where they cannot set things alight

You may require a Permit to Work.聽

For more information, please see: Hazardous Work

Lithium ion batteries

Lithium ion聽batteries supply power to many kinds of devices, including smartphones,聽laptops, e-bikes, scooters, vapes, smoke alarms, toys, and even cars. Like any聽product, a small number of these batteries can be defective 鈥� they can聽overheat, catch fire or explode. Here鈥檚 some advice to keep you and your family safe.